Skip to main content

Posts

Showing posts from November, 2017

sub

Subscription Option

How to make Water Level Indicator using IC NE555 Step by Step Guide|| Water Level Indicator

Water Level Indicator||How to make Water Level Indicator using IC NE555 Step by Step Guide|| Water Level Alarm Indicator:-

In this Artical you will learn the full basic guide to make water level indicator
So lets get started...


Introduction:- The circuit we are going to make is water level indicator. In this circuit, we will use IC Ne555. This IC is the heart of this circuit.
Also we will use Buzzer, resistors, screws and other type of component listed below. You can buy from given link in front of them.


Working:- This circuit is use to alarm when water makes a contact with metal. The buzzer buzzes and alarm us that the water has reached a level and the Tap should be turn off.


Circuit Diagram:-

























So if you want to make this Project, You Need the following Components 



1) IC NE555 and its Base :-      Buy From Here 2) Resistors:- 100k, 1k, :-         Buy pack
   3) 2.2 uF Capacitor:-                Buy
   4) 2 Terminal Connector:-        Buy 
   5)9v Battery and its connector:- Buy 9v Battery and Con…

How to make Battery Indicator using IC LM3914 Step by Step Guide|| Battery Indicator

Battery Indicator|| How to makeBattery Indicator using IC LM3914 Step by Step Guide:- In this artical you will learn the How to make 9v/12v Battery level indicatorfull simple basic guide to make this project..
So lets get started...

Introduction:- The circuit we are going to make is Batteryindicator. In this circuit, we will use IC LM3914. This IC is the heart of this circuit. In this Circuit we will use LED Bar Graph, resistors and other types of component. You can Buy them from the given link.


Working:- This circuit is used to determine the battery percentage/level remaining of any 9v/12v battery.



Circuit Diagram:-




So if you want to make this Project, You Need the following Components 

1) IC LM3914 and its Base 
2) Resistors:- 4.7k, 18k, 56k ohm
3) 10 LED or LED Bar Graph
4) 2 Terminal Connector
5)9v Battery and its connector
6) Push Button
7)10k Variable Resistor
8)Wires


'If you dont want to read full artical then here is the video of 'How to make battery indicator step by step guide'…

Getting Started With Electronics-Electronic School

Getting Started With Electronics:-


So, if you are reading this, you are probably a BEGINNER looking for 
How To Get Started With Electronics....






So Here we will look for The Three Things.....

1) Getting started with Electronics
2) How to Learn and Grow
3) How Far you can go? Is there any limits?


So Let's get Started...


1) Getting Started with Electronics:- We live in a high tech world where we are surrounded by bunch of electronic products like Drone, Robot, T.V., Washing Machine, Helicopter, Fan, A.C., etc and to make them we need to understand the science, the electronic components behind them...

For an Example take a Robot-if you want to learn how to make a Robot you need to learn its Basic things, you need to start from scratch....



2) How to learn and grow:- Here is your Guide-



    Step 1: Get An Overview Of The Basics....    Step 2: Start Building Circuits....    Step 3: Get an understanding of micro controllers. ...    Step 4: Start a project you are passionate about.... 


Now i'm go…