Skip to main content

sub

Subscription Option

How to make Water Level Indicator using IC NE555 Step by Step Guide|| Water Level Indicator

Water Level Indicator||How to make Water Level Indicator using IC NE555 Step by Step Guide|| Water Level Alarm Indicator:-

In this Artical you will learn the full basic guide to make water level indicator 
So lets get started...


Introduction:- The circuit we are going to make is water level indicator. In this circuit, we will use IC Ne555. This IC is the heart of this circuit.
Also we will use Buzzer, resistors, screws and other type of component listed below. You can buy from given link in front of them.


Working:- This circuit is use to alarm when water makes a contact with metal. The buzzer buzzes and alarm us that the water has reached a level and the Tap should be turn off.


Circuit Diagram:- 

























So if you want to make this Project, You Need the following Components 



1) IC NE555 and its Base :-      Buy From Here
2) Resistors:- 100k, 1k, :-         Buy pack
   3) 2.2 uF Capacitor:-                Buy
   4) 2 Terminal Connector:-        Buy 
   5)9v Battery and its connector:- Buy 9v Battery and Connector
   6) Buzzer:-                              Buy
   7) Screws or any metal
   8)Wires:-                                 Buy
   9) Soldering iron set:-            Buy From Here


'If you dont want to read full artical then here is the video of 'How to make water level indicator step by step guide'.














 Construction:- 

1) Insert IC base into zero pcb.

2) Solder it. Learn How to solder.

3)Take the capacitor of value 2.2uf and connect positive terminal to pin no.2 and negative terminal to pin no.1. Learn what is Capacitors.

4)Insert a Resistor of value 100k and solder its one leg to pin no.6 and other one to pin no.7.Learn what is Resistor.

5) Now take a Resistor of value 1k, solder its one leg to pin no.7.

6) Now take a wire and solder its one end to the another leg of 1k resistor.

7) Take a screw or any metal and tie it with another end of wire that is connected to 1k Resistor.

Half part is completed. Now

8)Take the Buzzer and connect its Negative terminal to pin no.3 and positive terminal to pin no.4.

9)Connect pin no.4 to pin no.8.

10)Now insert two terminal connector.

11)Now take 2 wires, connect one terminal to pin no.4 (that is positive side) with the help of wires and other terminal to pin no.1 (that is negative side).

11) Now connect the remaining connections like connect pin no.2 to pin no.6 with the help of wires.

12) Take a wire and solder its one side to  pin no.8 or 4, take another screw or metal and connect it from the other end of wire.

12) Now insert IC 555 into IC Base.

Before going into this last step, i want to tell you that You can also modify circuit by putting led, Just insert an LED in zero pcb, connect and solder its positive leg to positive terminal of Buzzer and its negative leg to negative terminal of Buzzer.

13) Now connect battery connector in two terminal connector and connect a 9v Battery.
  
14) Circuit is ready, now fill a bucket, tape screw in upper side and just fill it with water.

15) When the water will come in contact with screws, Buzzer and led( If you have modified with LED) will alarm you.
And thats how you can make it.



Learn the full Basic information of IC NE555.






So that all about "How to make Water Level Indicator using IC NE555 Step by Step Guide".







So with the help of this artical you can solve Water tank overflow at home.

So Comment down below your Problems and any questions.




Comments


  1. Great innovation and sensors are everywhere. Nice article and informative. Now you can also monitor anything with the help of wifi temperature sensor.

    ReplyDelete
  2. Great post.Thanks for sharing this article with us.Keep posting!!!
    Water Level Alram in chennai

    ReplyDelete

Post a Comment

Popular posts from this blog

IOT Internet Of Things- Every Thing You Need To Know About Internet Of Things

IOT- Every Thing You Need To Know About Internet Of Things:-

Technology have grown up so much high from what we have expected our future in past decade.
From doing thing manually to now doing thing by sitting on you couch, we have evolved.




Therefore something new also has evolved from past years and that term is knows as "IOT-Internet of Things".
















The term itself defines what is IOT.

But here is the simple definition:- To control anything fromanywhere, regardless of your surroundings like 'chair, fan, t.v., lights etc, to something which is far away from you using internet is known as Internet of Things.

                                                         or

To connect a physical thing like fan and lights to internet, and running/starting them using your mobile device is known as IOT-Internet of Things.


Sounds strange right? But yes that is what we achieved.



Now lets look at how it is done:-









The best example of IOT is "Home Automation".
Home Automation is the term in …

How to make Battery Indicator using IC LM3914 Step by Step Guide|| Battery Indicator

Battery Indicator|| How to makeBattery Indicator using IC LM3914 Step by Step Guide:- In this artical you will learn the How to make 9v/12v Battery level indicatorfull simple basic guide to make this project..
So lets get started...

Introduction:- The circuit we are going to make is Batteryindicator. In this circuit, we will use IC LM3914. This IC is the heart of this circuit. In this Circuit we will use LED Bar Graph, resistors and other types of component. You can Buy them from the given link.


Working:- This circuit is used to determine the battery percentage/level remaining of any 9v/12v battery.



Circuit Diagram:-




So if you want to make this Project, You Need the following Components 

1) IC LM3914 and its Base 
2) Resistors:- 4.7k, 18k, 56k ohm
3) 10 LED or LED Bar Graph
4) 2 Terminal Connector
5)9v Battery and its connector
6) Push Button
7)10k Variable Resistor
8)Wires


'If you dont want to read full artical then here is the video of 'How to make battery indicator step by step guide'…