Skip to main content

Pay For The Python Course By Ashish Kushwaha

Pay with debit\credit here:



            OR


Pay with Paypal here:

Comments

Popular posts from this blog

IOT Internet Of Things- Every Thing You Need To Know About Internet Of Things

IOT- Every Thing You Need To Know About Internet Of Things:-

Technology have grown up so much high from what we have expected our future in past decade.
From doing thing manually to now doing thing by sitting on you couch, we have evolved.




Therefore something new also has evolved from past years and that term is knows as "IOT-Internet of Things".
















The term itself defines what is IOT.

But here is the simple definition:- To control anything fromanywhere, regardless of your surroundings like 'chair, fan, t.v., lights etc, to something which is far away from you using internet is known as Internet of Things.

                                                         or

To connect a physical thing like fan and lights to internet, and running/starting them using your mobile device is known as IOT-Internet of Things.


Sounds strange right? But yes that is what we achieved.



Now lets look at how it is done:-









The best example of IOT is "Home Automation".
Home Automation is the term in …

How to make Battery Indicator using IC LM3914 Step by Step Guide|| Battery Indicator

Battery Indicator|| How to makeBattery Indicator using IC LM3914 Step by Step Guide:- In this artical you will learn the How to make 9v/12v Battery level indicatorfull simple basic guide to make this project..
So lets get started...

Introduction:- The circuit we are going to make is Batteryindicator. In this circuit, we will use IC LM3914. This IC is the heart of this circuit. In this Circuit we will use LED Bar Graph, resistors and other types of component. You can Buy them from the given link.


Working:- This circuit is used to determine the battery percentage/level remaining of any 9v/12v battery.



Circuit Diagram:-




So if you want to make this Project, You Need the following Components 

1) IC LM3914 and its Base 
2) Resistors:- 4.7k, 18k, 56k ohm
3) 10 LED or LED Bar Graph
4) 2 Terminal Connector
5)9v Battery and its connector
6) Push Button
7)10k Variable Resistor
8)Wires


'If you dont want to read full artical then here is the video of 'How to make battery indicator step by step guide'…

How to make Water Level Indicator using IC NE555 Step by Step Guide|| Water Level Indicator

Water Level Indicator||How to make Water Level Indicator using IC NE555 Step by Step Guide|| Water Level Alarm Indicator:-

In this Artical you will learn the full basic guide to make water level indicator
So lets get started...


Introduction:- The circuit we are going to make is water level indicator. In this circuit, we will use IC Ne555. This IC is the heart of this circuit.
Also we will use Buzzer, resistors, screws and other type of component listed below. You can buy from given link in front of them.


Working:- This circuit is use to alarm when water makes a contact with metal. The buzzer buzzes and alarm us that the water has reached a level and the Tap should be turn off.


Circuit Diagram:-

























So if you want to make this Project, You Need the following Components 



1) IC NE555 and its Base :-      Buy From Here 2) Resistors:- 100k, 1k, :-         Buy pack
   3) 2.2 uF Capacitor:-                Buy
   4) 2 Terminal Connector:-        Buy 
   5)9v Battery and its connector:- Buy 9v Battery and Con…